Minelab F1A4 Wartungshandbuch PDF herunterladen (Seite 31)

Operations Manual

Page 31

6. Care of the F1A4 Detector

The F1A4 Detector is a high quality electronic instrument that is finely

engineered and housed in a durable container. Proper care and

maintenance will ensure long-term reliability of the detector.

Please observe the following precautions:

• It is important to keep the connectors clean and dry when not in use.

• The operating temperature range is between °30C and +60C.

Storage temperatures should be kept between °55C and +90C.

Prolonged storage at extreme elevated temperatures may reduce

the service life of some long life components.

• The Control Box is designed to be water resistant, but it is not

waterproof.

• If any part of the detector comes into contact with corrosive

substances (including salt or salt

water), wash it with fresh water

before stowing the equipment

• Do not use solvents to clean the

detector; use a damp cloth with

a mild soap or detergent.

• Over a long time the Search Coil

skid plate could wear if the ground

is scrubbed continuously while

searching. Minelab supplies a

replaceable skid plate for the coil.

This can be fitted by levering off

the existing plate and pushing the

replacement skid plate on

(see Figure 18).

Figure 18 - Use a Skid Plate

to Protect the Coil

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Keine Kommentare

Minelab F1A4 Wartungshandbuch Seite 31