Minelab F1A4 Wartungshandbuch PDF herunterladen (Seite 5)

Operations Manual

Page 5

1. Introduction

The Minelab range of metal detectors has been developed to meet the

needs of today“s mine and explosive ordnance clearance operations.

Minelab has built its experience in the minefields of South East Asia,

where its technology has been exposed to the harshest environments,

including highly mineralised, magnetic ground.

The F1A4 Mine Detector (see Figure 1) has been specifically designed

to provide semi-automatic ”switch and go— operation. The equipment

automatically adjusts Ground Balance, Threshold (Audio) and Fine

Frequency (Noise Cancel), leaving the operator free to concentrate on

other tasks. The F1A4 detector also has the ability to be used with as

many as 10 units operating in close proximity. The detector has been

designed and built to meet de-mining requirements and incorporates

safety features such as ”Low Battery— warning, audible ”OK— signal at

the end of setting cycles and includes a standard ”Test Piece—.

The main components of the detector are manufactured within tightly

controlled parameters so that

they can be interchanged in the

field without any requirement for

calibration.

The equipment is supplied

as a Mine Detecting Set

(see Figure 2) comprising:

‘ the detector,

‘ a carry case,

‘ an ear set,

‘ a test piece,

‘ an operations manual, and

‘ field guide.

Figure 2 - The F1A4

Mine Detecting Set

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com

1 2 3 4 5 6 7 8 9 10 ... 39 40

Keine Kommentare

Minelab F1A4 Wartungshandbuch Seite 5