Minelab The Sovereign Bedienungshandbuch PDF herunterladen (Seite 11)

Ready Set Go

You would be wise to read your owner’s manual several times. As you hunt and

then read the manual you will pick up more of the information needed to really

become proficient with these units.

Although you really need to sit down in a quiet place and read your manual. We have

included a couple of fast and easy set-up options to get you out the door in a hurry.

We assume that you are using the Sovereign XS or Excalibur in the factory default

mode settings. i.e.:

 The machine is set to the threshold search mode.

 The multi-tone target ID mode is in effect.

 The SunRay DTI-II meter is being used, if meter equipped.

 You have read the owner’s manual.

Basic Set-Up and Go:

 Set the Disc control to the third mark clockwise from the left. Number 3 on an

Excalibur. If hunting in the water and you are going to dig everything, set this

control full counter-clockwise for minimum discrimination.

 Set the Notch control all the way counter-clockwise. Excalibur users ignore this

step.

 Set the Sensitivity control full counter-clockwise to Auto.

 Set the all-metal/discriminate switch to discriminate. For Excalibur users, it’s the

disc/pinpoint switch and should be set to disc.

 For Sovereign users, turn the Volume/On-Off control full clockwise and adjust

the Threshold control for a slight sound.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Keine Kommentare

Minelab The Sovereign Bedienungshandbuch Seite 11