Minelab The Sovereign Bedienungshandbuch PDF herunterladen (Seite 9)

Set-Up Options

The Sovereign XS has two dealer set internal setup options.

1) Silent or audible threshold in the discriminate mode. This is a matter of personal

preference but Minelab recommends using an audible threshold and so do we.

Threshold is explained in more detail in the Techniques & Methods section of this

book.

2) Single or Multiple Tone Target ID. Minelab recommends using a Multiple Tone

Target ID as do we. This system has the audio increase in tone as the targets increase

in conductivity. Rejected targets produce no sound or a broken audio. Also the

threshold will be that of the last object detected until a new object is found. The tone

can be reset to a medium tone by momentarily switching from discriminate to

all-metal and then back to discriminate. This system requires the operator to learn

which of the various pitches or tones to associate with certain desirable targets and

will also free the operator from constant meter watching for the target ID. Some

operators can literally hear what is in the ground before they dig it and when used

with a visual target ID meter the operator becomes extremely accurate in guessing

what the detector is saying. The variable tone frequencies starts with the low tone of

about 80 Hz to the high tone of about 300 Hz. The Single Tone option emits a

constant tone for any target detected and the threshold also will be one tone (pitch).

Assumptions

The writers assume that you are using the Sovereign XS or Excalibur in the factory

default mode settings. i.e.:

 The machine is set to the threshold search mode.

 The multi-tone target ID mode is in effect.

 The user is using the SunRay DTI-II meter if meter equipped.

 You have read the owner's manual.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Keine Kommentare

Minelab The Sovereign Bedienungshandbuch Seite 9